LOW  POWER  SDRAM
16Mb
 


 

PRODUCT  FEATURES

• JEDEC standard 1.8V, 2.5V and 3.3V power supply.
• Auto refresh and self refresh.
• All pins are compatible with LVTTL interface.
• 4K refresh cycle / 64ms.
• Programmable Burst Length and Burst Type.
     - 1, 2, 4, 8 or Full Page for Sequential Burst.
     - 4 or 8 for Interleave Burst.
• Programmable CAS Latency :  2,3 clocks.
• Programmable Driver Strength Control.
     - Full Strength or 1/2, 1/4 of Full Strength
• Deep Power Down Mode
• All inputs and outputs referenced to the positive edge of the system clock.
• Data mask function by DQM.
• Internal dual banks operation.
• Burst Read Single Write operation.
• Special Function Support.
     -PASR (Partial Array Self Refresh)
     -Auto TCSR(Temperature Compensated Self Refresh)
• Automatic precharge, includes CONCURRENT Auto Precharge Mode and controlled Precharge


 
PRODUCT  FAMILY
Density
Part Number
Configuration
Voltage Range
Speed
Features
Package
16Mb
1Mb x 16
1.65V - 1.95V
133/166MHz
PASR, Auto TCSR, DPD
60-FBGA/Green
16Mb
1Mb x 16
1.65V - 1.95V
133/166MHz
PASR, Auto TCSR, DPD
50-TSOP2/Green
16Mb
1Mb x 16
2.3V - 2.7V
133/166MHz
PASR, Auto TCSR, DPD
60-FBGA/Green
16Mb
1Mb x 16
2.3V - 2.7V
133/166MHz
PASR, Auto TCSR, DPD
50-TSOP2/Green
16Mb
1Mb x 16
2.7V - 3.6V
133/166MHz
PASR, Auto TCSR, DPD
60-FBGA/Green
16Mb
1Mb x 16
2.7V - 3.6V
133/166MHz
PASR, Auto TCSR, DPD
50-TSOP2/Green
16Mb
1Mb x 16
1.65V - 1.95V
133MHz
PASR, Auto TCSR, DPD
Green Wafer
16Mb
1Mb x 16
2.3V - 2.7V
133MHz
PASR, Auto TCSR, DPD
Green Wafer
16Mb
1Mb x 16
2.7V - 3.6V
133MHz
PASR, Auto TCSR, DPD
Green Wafer